| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | List |
| Brown and Sharpe | #2 | 1972 | 8197 | AUTO SCREW MACHINES, SINGLE SPINDLE | | Very Good | Yes | 1 1/4" Capacity, 3.5" Chucking Length, 3,503 RPM, 7.5 HP, 8 Position Turret, Change Gears, Coolant, Vertical Cross Slide | Yes | 1972 Brown and Sharpe #2 |
| Star | VNC-20 | 1984 | 9754 | AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL | Fanuc 3T | | Yes | | On Way | 1984 Star VNC-20 Fanuc 3T |
| Haas | Servo Bar 300 | 2004 | 6416 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | Yes | Bar Capacity 1/4" to 3-1/8", Maximum Bar Length 60", Barfeed in Very Good Condition | Yes | 2004 Haas Servo Bar 300 |
| Iemca | AS 325 Type 52 | 2002 | 8195 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | Yes | 0.118" to 0.98425" Capacity, 205" Bar Length | Yes | 2002 Iemca AS 325 Type 52 |
| Iemca | Prodigy 547/21 | 2003 | 9806 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | No | | Yes | 2003 Iemca Prodigy 547/21 |
| LNS | Quick Load Servo S2 | 2001 | 8310 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Like New | | | Yes | 2001 LNS Quick Load Servo S2 |
| LNS | Quick Load Servo S3 | 200? | 10167 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Very Good | No | | On Way | 200? LNS Quick Load Servo S3 |
| LNS | Quick Load Servo S3 | 2008 | 9710 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Excellent | No | | Yes | 2008 LNS Quick Load Servo S3 |
| LNS | Sprint 2 HydroBar | 1992 | 9491 | BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL | | Good | No | 1/2" to 3 1/8" Capacity, 12' Bar Length, Bar Storage Rack, Auto Load, PLC Interface, Extra Push Rods, Bar Blocks, Complete Hydraulics | Yes | 1992 LNS Sprint 2 HydroBar |
| Scharmann | WF-132 | 1964/2007 | 10089 | BORING MILLS, HORIZ, FLOOR TYPE CNC and NC | Heidenhain TNC-320 | Excellent | Yes | | Yes | 1964/2007 Scharmann WF-132 Heidenhain TNC-320 |
| Giddings and Lewis | G-50-TX | 1981 | 7677 | BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC | Giddings & Lewis 800B | Good | Yes | 5" Spindle, 50 Taper, 1,400 RPM, 30 HP, 96" x 72" 36" x 56" Travels, Two (2) 48" x 72" Pallet Shuttle Tables, Full Forth Rotary Table, 100 ATC, Steel Way Covers, Chip Conveyor | Yes | 1981 Giddings and Lewis G-50-TX Giddings & Lewis 800B |
| Mitsubishi | MQF-150 | 1981 | 7393 | BORING MILLS, HORIZ, FLOOR TYPE CNC W-ATC | Allen Bradley 7320 | Neds Repair | No | 5.905" Spindle, 50 Taper, 2,000 RPM, 50 HP, 137.79" x 86.61" x 13.77" x 27.55" Travels, 42" x 140" Table, Hydrostatic Bearings All Axes, Full Three Axis NC Control, Chip Conveyor | Yes | 1981 Mitsubishi MQF-150 Allen Bradley 7320 |
| Giddings and Lewis | 330 | 1948 | 6637 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes | 1948 Giddings and Lewis 330 |
| Giddings and Lewis | 330-T | 1967 | 6636 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes | 1967 Giddings and Lewis 330-T |
| Giddings and Lewis | 350-T | 1952 | 6635 | BORING MILLS, HORIZ, TABLE TYPE | | Good | No | 5" Spindle, # 6 Morse, 375 RPM, 15 HP, 60" x 120 Table, 108" x 60" x 36" x 96" Travels, Three (3) Axis DRO's, Outrigger Support | Yes | 1952 Giddings and Lewis 350-T |
| Lucas | 441B72 | 19?? | 9922 | BORING MILLS, HORIZ, TABLE TYPE | | Very Good | Yes | | Yes | 19?? Lucas 441B72 |
| PBR | AF-90 | 1967 | 8933 | BORING MILLS, HORIZ, TABLE TYPE | | Very Good | Yes | 3 1/2" Spindle, BT 45 Taper, 1,500 RPM, 15 HP, 58" x 48" x 22" x 60" Travels, 47" x 37" Rotary Table, Tailstock, 11" Spindle Support, Accurite III 2-Axis DRO, Coolant System, Pendant Control, Quick Change Spindle, Outer Bearing Column, Power Draw Bar, Facing Head Available | Yes | 1967 PBR AF-90 |
| DeVlieg | JMC-4360 | | 10140 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Centroid M 400 | Good | Yes | | Yes | DeVlieg JMC-4360 Centroid M 400 |
| Burgmaster | HTC-330 L | 19?? | 9919 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | GE 550 | Good | Yes | | Yes | 19?? Burgmaster HTC-330 L GE 550 |
| Cincinnati | 10 HC-1500 | 19?? | 9921 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Acramatic 2.1 Big Blue | Good | | | Yes | 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue |
| Cincinnati | 10 HC-1500 | 19?? | 9920 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Acramatic 2.1 Big Blue | Good | Yes | | Yes | 19?? Cincinnati 10 HC-1500 Acramatic 2.1 Big Blue |
| Bullard | 36" Dynatrol | 1964 | 7889 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 36" 3-Jaw Chuck, 48" Swing, 30" Under Rail, 3008 RPM, 50 HP, 4-Pos. Turret Head, Power Rapid Traverse All Directions, Full Pendant Control, Hardened and Ground Ways | Yes | 1964 Bullard 36" Dynatrol |
| Bullard | 36" Spiral Drive | | 8413 | BORING MILLS, VERTICAL and VTL | | Godd | Yes | | Yes | Bullard 36" Spiral Drive |
| Bullard | 42" Cutmaster | 1954 | 6223 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes | 1954 Bullard 42" Cutmaster |
| King | 62" | 1948 | 8285 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 62" Table, 72" Swing, 62" Under Rail, 103 RPM, 50 HP, Two Ram Head(s), One Side Head, 66" 4-Jaw Manual Chuck, Pendant Control | Yes | 1948 King 62" |
| Pensotti | KN-950 | 1968 | 9103 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount | Yes | 1968 Pensotti KN-950 |
| Amera-Seiki | VT-1000T | 2008 | 9861 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | Like New | Yes | | Yes | 2008 Amera-Seiki VT-1000T Fanuc OiTC |
| Amera-Seiki | VT-600 | 2008 | 9684 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | Very Good | Yes | | Yes | 2008 Amera-Seiki VT-600 Fanuc OiTC |
| Amera-Seiki | VT-800 | 2010 | 10117 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTD | New | Yes | | Yes | 2010 Amera-Seiki VT-800 Fanuc OiTD |
| Bullard | 36" Dynatrol | 1968 | 9939 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Good | Yes | 36" 4-Jaw Manual Chuck, 39" Maximum Swing Side Head Up, 46" Maximum Swing Side Head Down, 30" Under Rail, 468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret Head, Power Indexing Turret Side Head, Variable Rapid Traverse | Yes | 1968 Bullard 36" Dynatrol Fanuc OT |
| Giddings and Lewis | 48" | 1970/2008 | 8448 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fagor 8055 | Excellent | Yes | 48" Table, 60" Swing, 60" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head | Yes | 1970/2008 Giddings and Lewis 48" Fagor 8055 |
| Gray | RM 66 | 1980/08 | 8222 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiT | Rebuilt | Yes | 66" Table, 72" Swing, 66" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor | Yes | 1980/08 Gray RM 66 Fanuc OiT |
| Stanko | 55" | 1964/1995 | 8946 | BORING MILLS, VERTICAL and VTL, CNC and NC | NUM-1060 | Very Good | Yes | 55.11" Table, 62.99" Swing, 39.37 Under Rail, 13,800 Table Load, 75 HP, Five Sided Turret, Tool Holders, Coolant System, Coolant & Chip Guarding Enclosure, Turret Load / Unload Operator Station, Full Three Axis CNC Control, Power Indexing Turret Head | Yes | 1964/1995 Stanko 55" NUM-1060 |
| Daewoo | Puma-V550T-2SP | 1999 | 9986 | BORING MILLS, VERTICAL and VTL, CNC MULTI-SPINDLE | Fanuc 18iTB | Good | Yes | | Yes | 1999 Daewoo Puma-V550T-2SP Fanuc 18iTB |
| Doosan | DooTurn 2SP-V3 | 1994 | 10066 | BORING MILLS, VERTICAL and VTL, CNC MULTI-SPINDLE | Fanuc OTT | Good | Yes | | Yes | 1994 Doosan DooTurn 2SP-V3 Fanuc OTT |
| Amera-Seiki | VT-1000 ATC | 2009 | 9862 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc OiTC | Like New | Yes | | Yes | 2009 Amera-Seiki VT-1000 ATC Fanuc OiTC |
| Amera-Seiki | VT-1200 ATC | 2010 | 9810 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc OiTD | New | Yes | | Yes | 2010 Amera-Seiki VT-1200 ATC Fanuc OiTD |
| Amera-Seiki | VT-1600 ATC | 2010 | 9863 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iTB | New | No | | Yes | 2010 Amera-Seiki VT-1600 ATC Fanuc 18iTB |
| Dorries | VTL-1200 | 1992 | 10004 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 11T | | Yes | | On Way | 1992 Dorries VTL-1200 Fanuc 11T |
| Dorries | VTL-1600 | 1986 | 10005 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 6T | | Yes | | On Way | 1986 Dorries VTL-1600 Fanuc 6T |
| Pacific | 100-10 | 1985 | 7100 | BRAKES, PRESS, HYDRAULIC | | Good | Yes | | Yes | 1985 Pacific 100-10 |
| Pacific | 200-10 | 1966 | 7099 | BRAKES, PRESS, HYDRAULIC | | Good | Yes | 200 Tons, 10' Bed, 8' 4" Between Housings, 7.5" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge | Yes | 1966 Pacific 200-10 |
| Wysong | PH-6096 | 1996 | 9134 | BRAKES, PRESS, HYDRAULIC | Wysong GC 6000 | Very Good | Yes | 60 Tons, 1/4" Mild Steel Capacity, 8' Bed, 104" Between housings, 6" Stroke, 15" Open Height, 300 IPM Approach, 22 IPM Working, 225 IPM Return, 15 HP, 24" Two (2) Axis CNC Back Gauge, Operator Control Pedestal, Flush Mount Frame | Yes | 1996 Wysong PH-6096 Wysong GC 6000 |
| Chicago | Model 68-B | 1978 | 8449 | BRAKES, PRESS, MECHANICAL | | Good | Yes | | Yes | 1978 Chicago Model 68-B |
| Milwaukee | 3045-5 | | 8626 | BRAKES, PRESS, MECHANICAL | | Good | Yes | | Yes | Milwaukee 3045-5 |
| Colonial Broach | VDS-6-36 | 1994 | 7139 | BROACHES, VERTICAL, PULL DOWN | | Good | Yes | | On Way | 1994 Colonial Broach VDS-6-36 |
| Jones and Lamson | FC-14 | | 8900 | COMPARATORS | | Very Good | Yes | | Yes | Jones and Lamson FC-14 |
| Knoll | SF 2000/F60-4 | 2005 | 8305 | COOLANT FILTERING SYSTEMS | | Excellent | Yes | | Yes | 2005 Knoll SF 2000/F60-4 |
| Knoll | VRF 450/550 | 2006 | 8304 | COOLANT FILTERING SYSTEMS | | Excellent | Yes | | Yes | 2006 Knoll VRF 450/550 |
| Transor | FWC-110-TRP | 2004 | 8907 | COOLANT FILTERING SYSTEMS | | Very Good | Yes | | Yes | 2004 Transor FWC-110-TRP |
| ChipBlaster | 1513V | 2002 | 9958 | COOLANT PUMP SYSTEM | | Good | No | | Yes | 2002 ChipBlaster 1513V |
| Brown and Sharpe | Micro-Xcel PFX 4-5-4 DCC | 1997 | 8327 | COORDINATE MEASURING MACHINES | | Very Good | Yes | 22" x 30" x 17" Table, 18" x 20" x 16" Travels, Computer With MM4 Software, Digitizing and Scanning Capabilities, B & S Controller, Computer, Joystick Control | Yes | 1997 Brown and Sharpe Micro-Xcel PFX 4-5-4 DCC |
| Brown and Sharpe | One 7.7.5 | 2006 | 8831 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | 2006 Brown and Sharpe One 7.7.5 |
| Brown and Sharpe | Validator | 1986 | 8765 | COORDINATE MEASURING MACHINES | | Good | Yes | | Yes | 1986 Brown and Sharpe Validator |
| Brown and Sharpe | Xcel 7-10-7 | 1989 | 8372 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | 1989 Brown and Sharpe Xcel 7-10-7 |
| Renishaw | Cyclone Digitizer | 1999 | 8174 | COORDINATE MEASURING MACHINES | | Very Good | Yes | 26" x 25" x 18" Table, 23.6" x 19.7" x 15.7" Travels, Computer With Software, Extra Fixtures, Full Digitizing Capabilities | Yes | 1999 Renishaw Cyclone Digitizer |
| Amera-Seiki | DTM-40 | 1996 | 10118 | DRILLING and TAPPING MACHINES CNC | Mitsubishi 520M | Good | Yes | | Yes | 1996 Amera-Seiki DTM-40 Mitsubishi 520M |
| Brother | TC-221 | 1994 | 9981 | DRILLING and TAPPING MACHINES CNC | Brother CNC 400 | Good | Yes | | Yes | 1994 Brother TC-221 Brother CNC 400 |
| Hyundai | SPT-V30TD | 1999 | 8435 | DRILLING and TAPPING MACHINES CNC | Yasnac J-50M | Very Good | Yes | Tables - 23.62" x 17.7, Travels - 19.68" x 11.81" x 11.81", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO, RS-232 Port Programming, Splash Guard | Yes | 1999 Hyundai SPT-V30TD Yasnac J-50M |
| Miyano | MTV-C310 | 1998 | 5974 | DRILLING and TAPPING MACHINES CNC | Yasnac M-100 | Very Good | Yes | Table - 18.9" x 14.17", 15.75" x 11.81" x 9.84" Travel, 16,000 RPM, 30 Taper, 15 ATC, Rigid Tapping, RS-232 Port, Miscellaneous Tool Holders and Manuals | No | 1998 Miyano MTV-C310 Yasnac M-100 |
| Buhr | | | 9888 | DRILLS, H.D. and SENSITIVE, MULTI SPINDLE | | | | | Yes | Buhr |
| Natco | | 1981 | 9869 | DRILLS, H.D. and SENSITIVE, MULTI SPINDLE | | Good | No | | Yes | 1981 Natco |
| Natco | F3B | | 9887 | DRILLS, H.D. and SENSITIVE, MULTI SPINDLE | | Good | No | | Yes | Natco F3B |
| Carlton | 4A | 1954 | 9269 | DRILLS, RADIAL | | Very Good | Yes | 6' Arm, 19" Column, 72" Under Spindle, 15 HP, 1,500 RPM, Power Clamping, Power Elevation, Box Table | Yes | 1954 Carlton 4A |
| Cegielski (Polamco) | GRV-554 | 1980 | 7552 | DRILLS, RADIAL | | Very Good | Yes | 8' Arm, 18" Column, 68.9" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5", Drilling Capacity Mild Cast 3.1", Box Table, Power Clamping, Power Elevation | Yes | 1980 Cegielski (Polamco) GRV-554 |
| Giddings and Lewis | 6' x 15" | 1962 | 9938 | DRILLS, RADIAL | | Very Good | Yes | 15" Column, 6' Arm, 25 HP, # 6 Taper, Power Clamping to Arm and Head, Power Elevation of Arm, Power Rapid Head Traverse, Box Table | Yes | 1962 Giddings and Lewis 6' x 15" |
| Charmilles | Roboform 20 | 1991 | 9382 | EDM - RAM, CNC | Charmilles | Good | Yes | 15.62" x 11.8" Table, 11.81" x 9.8" x 9.8" Travels, 16 ATC, 32 Amps, 3-R Tooling, RS-232 Port, Transformer, Rustlick EDM Fluid, New Filters, 10,583 Cutting Hours | Yes | 1991 Charmilles Roboform 20 Charmilles |
| Hansvedt | MS- 4 3050 Foreman | 1998 | 9767 | EDM - RAM, CNC | | Very Good | Yes | | Yes | 1998 Hansvedt MS- 4 3050 Foreman |
| Mitsubishi | M-25-J | 1993 | 9429 | EDM - RAM, CNC | Mitsubishi Control | Very | Yes | 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 35 Amp, System 3-R Tooling, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Transformer, Flexible Automatic Programming (FAP) | Yes | 1993 Mitsubishi M-25-J Mitsubishi Control |
| Mitsubishi | M-25-J | 1993 | 8625 | EDM - RAM, CNC | Mitsubishi Control | Very Good | Yes | 19.6" x 13.7" Table, 9.8" x 7.8" x 9.8" Travels, 29.53" x 13" x 20" Maximum Workpiece, 55 Amp, System 3-R Tooling, 1 Meg of Memory, 14" Color CRT, Programmable C-Axis, Fire Extinguisher, Filtration Unit, 3.5" Floppy Drive | Yes | 1993 Mitsubishi M-25-J Mitsubishi Control |
| Sodick | A3C | 1986 | 9355 | EDM - RAM, CNC | Sodick Mark VII | Good | Yes | | Yes | 1986 Sodick A3C Sodick Mark VII |
| Agie | Agitron 50 | 1991 | 9749 | EDM - WIRE, CNC | Agiematic D | | Yes | | On Way | 1991 Agie Agitron 50 Agiematic D |
| Charmilles | Robofil 240 | 2001 | 7035 | EDM - WIRE, CNC | Charmilles | Very Good | Yes | | Yes | 2001 Charmilles Robofil 240 Charmilles |
| Mitsubishi | FX-10 | 1998 | 8955 | EDM - WIRE, CNC | Mitsubishi | Good | Yes | | Yes | 1998 Mitsubishi FX-10 Mitsubishi |
| Sodick | A-500 WP | 1996/2005 | 9357 | EDM - WIRE, CNC | Sodick Mark-21 | Excellent | Yes | Tank - 30" x 18" x 12", Travels - 19.685" x 13.8" x 10.63", 50 Amp, Floppy Drive, Simultaneous U-V Taper Control, Chiller, APT Programmer, Automatic Wire Threading, Machine Refurbished in 2005, Very Little Use Since | Yes | 1996/2005 Sodick A-500 WP Sodick Mark-21 |
| Torchmate | Torchmate 3 | 2008 | 9190 | FLAME CUTTER, CNC | Torchmate | Like New | Yes | 48" x 96" Cutting Capacity, 1/4" - 1 1/2" Plasma Cutting Capacity, Hypertherm 1650 Head, Automatic Height Control Sensing On Plasma Head To Prevent Warping | Yes | 2008 Torchmate Torchmate 3 Torchmate |
| Cincinnati | DE | 19?? | 8484 | GRINDERS, CYLINDRICAL UNIVERSAL | | Fair | Yes | | Yes | 19?? Cincinnati DE |
| Karsten | KC-AS 1600 | 1975 | 8353 | GRINDERS, CYLINDRICAL UNIVERSAL | | Good | Yes | 14.17" Work Dia., 63" Length, 14.74" x 4" x 5" Wheel, Internal Spindle, Pendant Control, Wheel Dresser, Barnes Coolant Filtration System, Holding Tight Tolerances of +/- .00025 | Yes | 1975 Karsten KC-AS 1600 |
| Okuma | GA-44 | 1992 | 9050 | GRINDERS, CYLINDRICAL, NC and CNC | OSP-5020G | Good | No | | Yes | 1992 Okuma GA-44 OSP-5020G |
| Moore | #1 | 19?? | 9812 | GRINDERS, JIG, NC and CNC | | Good | Yes | | Yes | 19?? Moore #1 |
| K.O. Lee | S1024523 | 2000 | 8224 | GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC | Leematic | Very Good | No | 24" x 10" Table, 28" x 11 3/4" Travels, 5 HP, 1,900 RPM, Leematic Programmable Control, Table Speed Flow Control Valves, Spindle RPM and Load Indicator, Separate Coolant Tank and Pump, Magnetic Chuck | Yes | 2000 K.O. Lee S1024523 Leematic |
| Tru Tech | TT-8000 | 2003 | 7837 | GRINDERS, SURFACE, RECIP. TABLE, (Horizontal Spdl), NC and CNC | Tru Tech | Like New | Yes | 18" x 6" Chuck, 12" x 6" Travels, 3 HP, Pentium IV Computer, Pick-N-Place Talking Software With Built-In Program Self-Training, Fully Programmable Variable Speed Workhead, Diamond Grinding Wheel, Mounted and Balanced on Flange, Wheel Dressing Attachment, Balancing Arbor, Coolant Tank With Filter System and Hoses, 3" Ultra-Precision Grinding Unit, Through Feed Attachment For Centerless Grinding Work, Multiple Plunge, OD, ID, And Contour Grinding Capabilities, Mist Buster 500 | Yes | 2003 Tru Tech TT-8000 Tru Tech |
| Chevalier | Super 818 | 1995 | 9961 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | | Very Good | Yes | | Yes | 1995 Chevalier Super 818 |
| Harig | 612 Super | 1977 | 9766 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | | Very Good | Ye | 12" x 6" Chuck, 13 1/2" X Travel, 7" Y Travel, 1 1/2 HP, 3,450 RPM, Power Longitudinal & Cross Feed, Coolant System, Walker Elector Magnetic Chuck, Fine Feed Adjust For Cross and Down Feed, New Crossfeed Screw | Yes | 1977 Harig 612 Super |
| Okamoto | 820A | 1999 | 9270 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | | Very Good | Yes | 18" x 8" Walker Magnetic Chuck, 18" Under Wheel, 20" x 8" Travels, 1 1/3 HP, Two (2) Axis DRO, Fine Cross and Vertical Feeds, Power Elevation, External Coolant Pump and Tank | Yes | 1999 Okamoto 820A |
| Blanchard | 20K-36 | 1954 | 9937 | GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL | | Good | Yes | 36" Chuck, 38" Swing, 12 Under Wheel, 20" Grinding Wheel, 36" Neutrifier Magnetic Chuck Control, Coolant System, Splash Guards | Yes | 1954 Blanchard 20K-36 |
| Royal Oak | D-S | 1961 | 8527 | GRINDERS, TOOL and CUTTER | | Good | Yes | | Yes | 1961 Royal Oak D-S |
| Anca | RG-7 | 1998 | 8841 | GRINDERS, TOOL and CUTTER, NC-CNC | Anca System 32 | Very Good | Yes | Min. - Max. Tool Dia. / Length - .079 - 6" / 13", Travels - 13.386" x 9.449" x 9.449" x 9.449", A-Axis Length / Rotation / Taper - 5.9" / 360° / ISO 50, Hoffman 600 CFM Mist Collector, PROjection Fluting, Large Selection of Tooling Including Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options, Machine Rebuilt by Anca in 2004, Not Used Since | Yes | 1998 Anca RG-7 Anca System 32 |
| Anca | TG-4 Fastgrind | 1994 | 8164 | GRINDERS, TOOL and CUTTER, NC-CNC | Anca Series 2000 | Good | Yes | Max. Swing 3.15", Max. Length 15.86", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff) | Yes | 1994 Anca TG-4 Fastgrind Anca Series 2000 |
| Sentry | TG-410 | 1999 | 8908 | GRINDERS, TOOL and CUTTER, NC-CNC | Autocon CNC | Very Good | Yes | | On Way | 1999 Sentry TG-410 Autocon CNC |
| Star | ATG-6DC | 1990 | 7280 | GRINDERS, TOOL and CUTTER, NC-CNC | | Very Good | Yes | | | 1990 Star ATG-6DC |
| Star | PTG-512 | 2005 | 8906 | GRINDERS, TOOL and CUTTER, NC-CNC | | Very Good | Yes | Max. Tool Dia. / Length - .3.937" / 21", Travels - 11.8" x 8.7" x 22", A-Axis Rotation / Taper - 360° / ISO 50, 10,000 RPM, 30 HP, NUMROTOplus Part Probing Software, NUMROTOplus 2D Grinding Simulation, Closed Loop Chiller on Grinding Spindle & Headstock, Glass Scales on All Linear Axes, HSK Wheel Mounting - Too Many Option To List - Check Out The Full Quote | Yes | 2005 Star PTG-512 |
| Unison | 4000 Super TruFlute | 1996 | 5967 | GRINDERS, TOOL and CUTTER, NC-CNC | | Good | No | Max. Swing 14", Max. Length 12", 14" x 8" x 13.5" Travels, 10 HP, A & C Axis, Operating Only With Oil, Drill, End Mill, Step Tool and Burr Software, New Spindle Installed 10/13/06 | Yes | 1996 Unison 4000 Super TruFlute |
| Walter | Helitronic Power | 1996 | 7882 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Fair | Yes | Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock | Yes | 1996 Walter Helitronic Power Walter HMC 400 |
| Walter | Helitronic Power | 1996 | 7883 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Good | Yes | Maximum Tool Diameter / Length - 10.25" / 15.75", Walter HMC 400 Control, Walter HMC 400, Software Pack (1, 2, 3, and 4), Operating Only With Oil, Tailstock | Yes | 1996 Walter Helitronic Power Walter HMC 400 |
| Walter | Power Production | 1997 | 7711 | GRINDERS, TOOL and CUTTER, NC-CNC | Walter HMC 400 | Good | Yes | Maximum Tool Diameter / Length - 12.59" / 14.46", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment | Yes | 1997 Walter Power Production Walter HMC 400 |
| Peddinghaus | 210 Super 13 | | 9765 | IRONWORKERS | | Very Good | Yes | | Yes | Peddinghaus 210 Super 13 |
| Piranha | P-50 | 1999 | 8836 | IRONWORKERS | | Very God | Yes | 50 Tons, 60 SPM, 3/4" Punch Cap., 5" x 5 x 3/8"Angle Shear Cap., 15" x 5/8" Flat Shear Cap., 1/4" - 1 1/2" Round Bar Cap., 1/2" - 1" Square Bar Cap., Miscellaneous Tooling | Yes | 1999 Piranha P-50 |
| Mitts and Merrill | Model 7B | | 9825 | KEYSEATER | Allen Bradley | Very Good | Yes | | Yes | Mitts and Merrill Model 7B Allen Bradley |
| Cincinnati | CL5-350 | 1991 | 9002 | LASERS | Fanuc | Good | No | | On Way | 1991 Cincinnati CL5-350 Fanuc |
| Mitsubishi | ML2512-LXP | 1996 | 7528 | LASERS | Mitsubishi LC10BV | Good | Yes | Two 48" x 96" Tables, 98.4" x 49.2" x 3.93" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set | Yes | 1996 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Mitsubishi | ML2512-LXP | 1996 | 9112 | LASERS | Mitsubishi LC10BV | Very Good | Yes | 48" x 96" Tables, 98.425" x 49.2" x 3.937" Capacity, 2,000 Constant and 3,000 Watts Pulse Resonator, Factory Installed Pallet Changer With Sheet Lifter, Accuchiller, Remote Jog Handle, Resonator Rebuilt In 2007 | Yes | 1996 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Mitsubishi | ML2512-LXP | 1998 | 8450 | LASERS | Mitsubishi LC10BV | Very Good | Yes | Two 48" x 96" Tables, 98.4" x 49.2" x 3.93" Travels, 3020D Resonator, 2,000 Watts, Factory Installed Pallet Changer With Sheet Lifter, High Pressure Assist Gas, Accuchiller, Non-Contact Cutting Head With Optional Auto Focus Pre-Set, Remote Jog Handle | Yes | 1998 Mitsubishi ML2512-LXP Mitsubishi LC10BV |
| Daewoo | Puma V-10 | 1996 | 9845 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc OT | Good | Yes | | Yes | 1996 Daewoo Puma V-10 Fanuc OT |
| Daewoo | Puma V-10 | 1996 | 9846 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc OT | Need Minor Repairs | Yes | | Yes | 1996 Daewoo Puma V-10 Fanuc OT |
| Daewoo | Puma V-300 G | 2000 | 9894 | LATHES, CNC, 2-AXIS, CHUCKER | | Good | Yes | | Yes | 2000 Daewoo Puma V-300 G |
| Doosan | Lynx-220C | 2008 | 9876 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 0iTC | Excellent | Yes | | Yes | 2008 Doosan Lynx-220C Fanuc 0iTC |
| Haas | SL-40 | 2002 | 10075 | LATHES, CNC, 2-AXIS, CHUCKER | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas SL-40 Haas 32 BIT |
| Haas | SL-40 | 2002 | 10076 | LATHES, CNC, 2-AXIS, CHUCKER | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas SL-40 Haas 32 BIT |
| Haas | SL-40 | 2002 | 10074 | LATHES, CNC, 2-AXIS, CHUCKER | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas SL-40 Haas 32 BIT |
| Haas | SL-40 | 2002 | 10077 | LATHES, CNC, 2-AXIS, CHUCKER | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas SL-40 Haas 32 BIT |
| Mazak | Powermaster 1100 | 1979/2010 | 8658 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 18T | Rebuilt | Yes | | Yes | 1979/2010 Mazak Powermaster 1100 Fanuc 18T |
| Mazak | Quick Turn-40N | 1998 | 9987 | LATHES, CNC, 2-AXIS, CHUCKER | Mazatrol T-Plus | Good | Yes | | On Way | 1998 Mazak Quick Turn-40N Mazatrol T-Plus |
| Mazak | Slant Turn-30 | 1997 | 9741 | LATHES, CNC, 2-AXIS, CHUCKER | Mazatrol T-Plus | Very Good | Yes | 21.25" Swing, 12.99" OCS, 63" Centers, 3,000 RPM, 3.15" Bore, 30 HP, 12 Station Turret, Tailstock, 10" 3-Jaw Chuck, RS-232 Port, Miscellaneous Tooling | Yes | 1997 Mazak Slant Turn-30 Mazatrol T-Plus |
| Mori-Seiki | SL-35B | 1994 | 10133 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 16TA | | Yes | | | 1994 Mori-Seiki SL-35B Fanuc 16TA |
| Okuma | LC-30 1C | 1982 | 7998 | LATHES, CNC, 2-AXIS, CHUCKER | OSP-3000L | Good | Yes | 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. Turret, Autoblok KNCS-NB 315-91 Quick Change Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Miscellaneous Spare Parts, RS-232 Port | Yes | 1982 Okuma LC-30 1C OSP-3000L |
| Okuma and Howa | HL-20 | 1996 | 9056 | LATHES, CNC, 2-AXIS, CHUCKER | Fanuc 18T | Good | No | | Yes | 1996 Okuma and Howa HL-20 Fanuc 18T |
| Amera-Seiki | LT-50 / 120" | 2009 | 7702 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 0iTC | New | Yes | | Yes | 2009 Amera-Seiki LT-50 / 120" Fanuc 0iTC |
| Birmingham | Top-Turn 406 | 2002 | 8705 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fagor 8025 | Very Good | Yes | 16" Swing, 34" Centers, 3,000 RPM, 7.5 HP, 4 Turret, Tailstock, 8" 3-Jaw Chuck, 10" 4-Jaw Chuck, 15” Face Plate, Two (2) Ball Bearing Steady Rests, Two (2) Speed Manual Tailstock, Bison Manual 5C Collets Chuck, Threading | Yes | 2002 Birmingham Top-Turn 406 Fagor 8025 |
| Clausing | K Series 2000 | 2001 | 8555 | LATHES, CNC, 2-AXIS, UNIVERSAL | | Very Good | Yes | 15.7" Swing, 9.65" SOC, 23" Swing in Gap, 50" Centers, 2,500 RPM, 2.16" Spindle Bore, 15 HP, 8 Station Turret, 8" 3-Jaw Hydraulic Chuck, RS-232 Port, Spindle Speed and Load Meter, Hydraulic Tailstock With Programmable Quill, Turret Tooling, Coolant System | Yes | 2001 Clausing K Series 2000 |
| Daewoo | Puma-6H S | 1987 | 7999 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 10T | Good | Yes | | Yes | 1987 Daewoo Puma-6H S Fanuc 10T |
| Daewoo | Puma-8 S | 1995 | 8773 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OTC | Good | Yes | 19.7" Swing, 12.2" SOC, 18" Centers, 5,000 RPM,2" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool Eye, RS-232 Port | Yes | 1995 Daewoo Puma-8 S Fanuc OTC |
| Haas | SL-20T | 2006 | 8961 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Excellent | Yes | 0" Swing, 20" Centers, 4,000 RPM, 20 HP, 10 Sta. Turret, 8" 3-Jaw, ProgrammableTailstock, Chip Auger, Floppy, 1 Meg of Memory, Visual Quick Code Programming, Tool Presetter, Spindle Orientation, Auto Parts Catcher, High Intensity Lighting, Rigid Tapping, Machine From a Tech School | Yes | 2006 Haas SL-20T Haas 32 BIT |
| Haas | SL-40TL BB | 2007 | 8303 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Excellent | Yes | 40" Swing, 25.5" Turn Dia., 51" Centers, 1,400 RPM, 55 HP, 10 Sta. Turret, 18" 3-Jaw Air Chuck With 7.1" Hole, Tool Presetter, Programmable Hydraulic Tailstock, Big Bore Option, High Pressure Coolant (300 psi), Two Speed Geared Head, Steady Rest Provision With Schunk HTL-4 Steady Rest, Turbo Chip Conveyor, High Intensity Lighting, VOA Value Option Package-A, Long Bed Option | Yes | 2007 Haas SL-40TL BB Haas 32 BIT |
| Hitachi-Seiki | Hitec-Turn 20 | 1986 | 8043 | LATHES, CNC, 2-AXIS, UNIVERSAL | Seicos Multi | Good | Yes | 17.7" Swing, 11.2" OCS, 16" Centers, 3,600 RPM, 15 HP, 10 Station Turret, 8" 3-Jaw Hydraulic Chuck, Hydraulic Tailstock With Programmable Quill, Color CRT, RS-232 Port, Turret Tooling, Coolant System, Chip Conveyor, Conversational Control | Yes | 1986 Hitachi-Seiki Hitec-Turn 20 Seicos Multi |
| Ikegai | AX-30N | 1982 | 9940 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6TB | Good | Yes | | Yes | 1982 Ikegai AX-30N Fanuc 6TB |
| Lodge and Shipley | 1225U | 1982 | 9229 | LATHES, CNC, 2-AXIS, UNIVERSAL | GE 1050 | Good | Yes | 25" Swing, 12" SOC, 15.2 Turn Dia., 78" Centers, 2,500 RPM, 40 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret | No | 1982 Lodge and Shipley 1225U GE 1050 |
| Lodge and Shipley | 1540U | 1982 | 9228 | LATHES, CNC, 2-AXIS, UNIVERSAL | GE 1050 | Good | Yes | 30" Swing, 16" SOC, 17.3 Turn Dia., 78" Centers, 2,000 RPM, 50 HP, 12 Station Turret, 15" 3-Jaw Chuck, Geared Head, Programmable Tail Stock, Steady Rest, Chip Conveyor, Coolant Through Turret | Yes | 1982 Lodge and Shipley 1540U GE 1050 |
| Mazak | M-4 / 1500 | 1980 | 6050 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6TB | Good | Yes | | Yes | 1980 Mazak M-4 / 1500 Fanuc 6TB |
| Mazak | Quick Turn Nexus-250 | 2008 | 9037 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Matrix | Excellent | Yes | | Yes | 2008 Mazak Quick Turn Nexus-250 Mazatrol Matrix |
| Mazak | Quick Turn-10N | 1986 | 10128 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol T-1 | Fair | Yes | | On Way | 1986 Mazak Quick Turn-10N Mazatrol T-1 |
| Mazak | Quick Turn-10N | 1985 | 10127 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol T-1 | Fair | Yes | | On Way | 1985 Mazak Quick Turn-10N Mazatrol T-1 |
| Mazak | Quick Turn-200 | 2003 | 9257 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Very Good | Yes | 18.5" Swg, 12.4" Centers, 4,000 RPM, 15 HP, 12 Sta., Tailstock, 8" 3-Jaw Chuck, Manual Tool Eye, GL-30 Gantry Load / Unload System, Six (6) Position Rotary Stacker | Yes | 2003 Mazak Quick Turn-200 Mazatrol Fusion 640 T |
| Mazak | Quick Turn-250 | 2000 | 8254 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Very Good | Yes | 23.65 Swing, 10.5" SOC, 15.70 Turn Dia., 19.68" Turn Length, 5,000 RPM, 2.75 Bore, 20 HP, 12 Station Turret, 8" 3-Jaw Hydraulic Chuck, Tailstock, Automatic Tool Eye | Yes | 2000 Mazak Quick Turn-250 Mazatrol Fusion 640 T |
| Mori-Seiki | LL-7B / 3000 | 1980 | 9594 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6T | Good | Yes | | Yes | 1980 Mori-Seiki LL-7B / 3000 Fanuc 6T |
| Mori-Seiki | SL-1 | 1984 | 9786 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6T | Good | No | 16.5" Swing, 6.2" Max. Turning, 4,500 RPM, 10 HP, 8 Station Turret, Hydraulic Tailstock, 6" Collet Chuck, RS-232 Port, Turbo Chip Conveyor | Yes | 1984 Mori-Seiki SL-1 Fanuc 6T |
| Mori-Seiki | SL-25B/500 | 1994 | 10136 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 10T | | Yes | Swing 20.5", Swing Over Cross Slide 13.8", Maximum Turning Diameter 10.2", Length 20.9", 3,500 RPM, 24.8 HP, 10 Sta. Turret,10" 3-Jaw Chuck, Chip Conveyor | | 1994 Mori-Seiki SL-25B/500 Fanuc 10T |
| Mori-Seiki | SL-25B/500 | 1995 | 10135 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 10TB | | Yes | Swing 20.5", Swing Over Cross Slide 13.8", Maximum Turning Diameter 10.2", Length 20.9", 3,500 RPM, 24.8 HP, 10 Sta. Turret,10" 3-Jaw Chuck, Chip Conveyor | | 1995 Mori-Seiki SL-25B/500 Fanuc 10TB |
| Mori-Seiki | SL-25B/500 | 1997 | 10134 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OTC | | Yes | Swing 20.5", Swing Over Cross Slide 13.8", Maximum Turning Diameter 10.2", Length 20.9", 3,500 RPM, 24.8 HP, 10 Sta. Turret,10" 3-Jaw Chuck, Chip Conveyor, Tool Presetter | | 1997 Mori-Seiki SL-25B/500 Fanuc OTC |
| Mori-Seiki | SL-25B/500 | 1995 | 10137 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 10TA | | Yes | Swing 20.5", Swing Over Cross Slide 13.8", Maximum Turning Diameter 10.2", Length 20.9", 3,500 RPM, 24.8 HP, 10 Sta. Turret,10" 3-Jaw Chuck, Chip Conveyor, Tool Presetter | | 1995 Mori-Seiki SL-25B/500 Fanuc 10TA |
| Mori-Seiki | SL-300B / 700 | 1997 | 10132 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18iTA | | Yes | 18" Swing, 27.9" B.C., 2,500 RPM, 40 HP, 12 Sta. Turret, 12" 3-Jaw Hydraulic Chuck, | | 1997 Mori-Seiki SL-300B / 700 Fanuc 18iTA |
| Mori-Seiki | SL-3H | 1986 | 9381 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 6T | Need Repair | No | | Yes | 1986 Mori-Seiki SL-3H Fanuc 6T |
| Okuma | Crown L-106 SB | 2001 | 8340 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-U100L | Very Good | Yes | | Yes | 2001 Okuma Crown L-106 SB OSP-U100L |
| Okuma | Crown L-1420 / 650 BB | 2000 | 7362 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-U10L | Good | Yes | 24.41 Swing, 18.90" S.O.C. , 14.17" Turning Dia., 27" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15" 3-Jaw Kitagawa Hydraulic Chuck, Tow Along Tailstock, IGF, Lap 4, Auto Chamfering, MAC Man, Nose Radius 2B | Yes | 2000 Okuma Crown L-1420 / 650 BB OSP-U10L |
| Okuma | LB-15 | 199?? | 8485 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020L | Fair | Yes | | Yes | 199?? Okuma LB-15 OSP-5020L |
| Okuma | LB-25 | 1993 | 8260 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020LG | Fair | Yes | | Yes | 1993 Okuma LB-25 OSP-5020LG |
| Okuma | LC-30 1SC / 1000 | 1989 | 8261 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5000LG | Fair | Yes | | Yes | 1989 Okuma LC-30 1SC / 1000 OSP-5000LG |
| Okuma | LC-30 1SC / 1000 | 1987 | 8974 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5000L | Good | Yes | 19.69" Swing, 17.72" Turn Dia., 3,000 RPM, 40 HP, 12 Sta. VDI Turret, 12" 3-Jaw Kitagawa Chuck, RS-232 Port, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, Machine Rebuilt About Four (4) Years Ago - New Control, New Ball Screws, New Hydraulic Kit In Tailstock, Wipers, Installed New VDI Turret | Yes | 1987 Okuma LC-30 1SC / 1000 OSP-5000L |
| Okuma and Howa | ACT-20 | 1993 | 8325 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18T | Very Good | Yes | 20" Swing, 13.3" SOC, 11.81" Turning Dia., 18" Turning Length, 4,500 RPM, 2" Bar Cap. 20 HP, 12 Station Turret, Tailstock, 8" 3-Jaw Hydraulic Chuck, Chip Conveyor, Parts Catcher, Barfeed Interface | Yes | 1993 Okuma and Howa ACT-20 Fanuc 18T |
| Okuma and Howa | ACT-35L | 1996 | 8324 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18T | Very Good | Yes | 19.68"Swing, 17.25"SOC, 13.77" Turning Dia., 48.6 Turning Length, 3,500 RPM, 3.125" Bar Cap. 25 HP, 12 Station Turret, Programmable Tailstock Body & Quill, 12" 3-Jaw Hydraulic Chuck, Chip Conveyor, New X-Axis Ball Screw | Yes | 1996 Okuma and Howa ACT-35L Fanuc 18T |
| Romi | M-20 | 2003 | 10113 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 21iT | Very Good | Yes | 20.5" Swing, 17.2" SOC, 10.2" Tunr Dia., 60" Centers, 3,000 RPM, 2.56" Spindle Bore, 15 HP, Quick Change Tool Post, 12.5" 3-Jaw Chuck, Conversational Program System, Constant Surface Speed, Under 1,400 Cutting Hours | Yes | 2003 Romi M-20 Fanuc 21iT |
| Willis | 32120 | 2010 | 10038 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OiTC | New | Yes | | Yes | 2010 Willis 32120 Fanuc OiTC |
| Hardinge | Conquest T-51 | 1996 | 8588 | LATHES, CNC, 3-AXIS, CHUCKER W-MILLING | Fanuc 18TB | Good | Yes | 31" Swing, 26" OCS, 24" Max Mach., 4,500 RPM, 20 HP, 12 / 6 Sta. Turrets, 2" Bar Cap., C-Axis Milling, 12' Bar Feed, Chip Conveyor | Yes | 1996 Hardinge Conquest T-51 Fanuc 18TB |
| Amera-Seiki | T-310 MC | 2008 | 8239 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Fanuc 0iTC | Like New | Yes | | Yes | 2008 Amera-Seiki T-310 MC Fanuc 0iTC |
| Amera-Seiki | T-312 MC | 2008 | 9793 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Fanuc 0iTC | New | Yes | | Yes | 2008 Amera-Seiki T-312 MC Fanuc 0iTC |
| Mazak | Integrex 30 / 1000 | 1995 | 6234 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Mazatrol T-PLUS | Good | Yes | Swing 20", Swing Over Cross Slide 15.75", Maximum Turning Diameter 20", Length 40", 3,500 RPM, 35 HP, 20 Sta. ATC, 40 Taper, 10" 3-Jaw Chuck, Chip Conveyor, Coolant Through Milling Head, User Macros, Fully Programmable Tailstock Body and Quill, Automatic Tool Eye, EIA / ISO Input Function | Yes | 1995 Mazak Integrex 30 / 1000 Mazatrol T-PLUS |
| Mori-Seiki | Super Hi-Cell CH-250 | 2004 | 10152 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Seicos 18iTB | Very Good | Yes | Swing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool Holders | Yes | 2004 Mori-Seiki Super Hi-Cell CH-250 Seicos 18iTB |
| Okuma | Captain L-370 M BB | 2004 | 10121 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | OSP-E100L | Very Good | Yes | Swing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Renishaw Gauging, Fully Programmable Tailstock, Auto Door, Robot Interface, Tool Presetter, Live and Standard Tooling, Chip Conveyor, 200 PSI Coolant Pump, One Touch IGF, Parts Catcher, Bar Feed Interface | Yes | 2004 Okuma Captain L-370 M BB OSP-E100L |
| Daewoo | Puma-240 MSC | 2003 | 8506 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iT | Very Good | Yes | 21.65" Swing, 15.4" SOC, 11.4" Turn Dia., 32.3" Turn Length, 3,500 RPM, 2.56 Bar Cap., 25 HP, 6,000 RPM, S-26 Collet Chuck On Main, 3J Collect Chuck On Sub, Parts Catcher, Parts Conveyor, Ballscrew Driven Programmable Sub Spindle, Milling Spindle Synchronous Tapping, Chip Conveyor, LNS Bar Feed, Programmable Tool Setter, Load Monitoring, High Pressure Coolant (1,000 psi), Coolant Through Sub Spindle, All Control Option Turned On | Yes | 2003 Daewoo Puma-240 MSC Fanuc 18iT |
| Doosan | Puma-240 MSC | 2005 | 9910 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | | | 2005 Doosan Puma-240 MSC Fanuc 18iTB |
| Doosan | S310 SMLY | 2003 | 8789 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Very Good | Yes | | Yes | 2003 Doosan S310 SMLY Fanuc 18iTB |
| Miyano | BND-34S | 1994 | 9753 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 0TC/CRT | | Yes | 2.95" Swg, 10 HP, 8 Turning / 4 Live Tool Turret, Collet Chucks, Parts Conveyor, 12' LNS Five Tube Barfeed | On Way | 1994 Miyano BND-34S Fanuc 0TC/CRT |
| Mori-Seiki | NL-2500 SMC / 700 | 2008 | 10086 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Mori-Seiki MSX-850 MB | Excellent | Yes | | Yes | 2008 Mori-Seiki NL-2500 SMC / 700 Mori-Seiki MSX-850 MB |
| Mori-Seiki | SL-204 SMC | 2002 | 10087 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Mitsubishi MSG-805 | Excellent | Yes | | Yes | 2002 Mori-Seiki SL-204 SMC Mitsubishi MSG-805 |
| Amera-Seiki | TS-42 | 2006 | 8634 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi 64SM | Demo | Yes | | Yes | 2006 Amera-Seiki TS-42 Mitsubishi 64SM |
| Kitako | MT4-200 | 1995 | 8810 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1995 Kitako MT4-200 Fanuc 18T |
| Kitako | MT4-200 | 1996 | 8809 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1996 Kitako MT4-200 Fanuc 18T |
| Mori-Seiki | RL-203 | 2003 | 9254 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi MSG-803 | Very Good | Yes | 11.8" Swing, 9.44" Turning Dia., 5.9" Turning Length, 4,500 RPM, 15 HP, 2-8 Station Turrets, Two 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, Coolant Through Spindle, Spindle Orientation, Fourteen (14) Station Stocker, LG-05 Gantry Load / Unload System | Yes | 2003 Mori-Seiki RL-203 Mitsubishi MSG-803 |
| Okuma | LU-35 BB | 1997 | 9954 | LATHES, CNC, 4-AXIS, CHUCKER | OSP-7000L | Very Good | Yes | | Yes | 1997 Okuma LU-35 BB OSP-7000L |
| Warner and Swasey | 2-SC-15 | 1978 | 9029 | LATHES, CNC, 4-AXIS, CHUCKER | Allen Bradley 7360 | Good | No | 17 3/8" Swing, 1,178 RPM, 4.5" Spindle Bore, 50 HP, Twin Turret, 15" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader | No | 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 |
| Okuma | LR-15 | 1990 | 9743 | LATHES, CNC, 4-AXIS, UNIVERSAL | OSP-5020L | Good | No | | On Way | 1990 Okuma LR-15 OSP-5020L |
| Okuma | LU-15 2SC | 2000 | 8255 | LATHES, CNC, 4-AXIS, UNIVERSAL | OSP-U100L | Very Good | Yes | Swing 22", Swing Over Cross Slide 17.7", Maximum Turning Diameter 14.17", Length 23.62", 4,500 RPM, 30 HP, 12 / 8 Sta. Turrets, 8" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock | Yes | 2000 Okuma LU-15 2SC OSP-U100L |
| Okuma | LU-25 2SC | 1997 | 8256 | LATHES, CNC, 4-AXIS, UNIVERSAL | OSP-7000L | Very Good | Yes | Swing 22", Swing Over Cross Slide 16.54", Maximum Turning Diameter 16.80", Length 25.59", 3,500 RPM, 40 HP, 12 / 10 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck, Position Lower Simultaneous Tool Turrets (20 Total Tools), Lap-4, Animation, Cycle Time Calculator, User Task 2, Barfeeder Interface, 3.5" Floppy Disk Drive, NC Torque Limit, Chip Conveyor, Programmable Tailstock | Yes | 1997 Okuma LU-25 2SC OSP-7000L |
| Amera-Seiki | TS-52 MC | 2006 | 8633 | LATHES, CNC, 4-AXIS, W-MILLING | Mitsubishi 64S | Demo | Yes | | Yes | 2006 Amera-Seiki TS-52 MC Mitsubishi 64S |
| Doosan | Z340SM | 2002 | 8266 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iTB | Like New | Yes | | Yes | 2002 Doosan Z340SM Fanuc 18iTB |
| Emco Maier | Emco-Turn 332 | 2000 | 9450 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Siemens 840D | Very Good | No | 16.92" Swing, 11.42" SOC, 8.66" Max. Cut Dia., 18.99" Max. Cut Length, 8,000 RPM, 2 - 12 Sta. Turrets, 17 HP Main, 13 HP Sub., 16C Collet Chuck on Main and Sub Spindle, Coolant Through Sub-Spindle, Parts Catcher, Bar Feed Interface, Live Tooling, LNS Quick Load Servo 2 Bar Feed, Parts Ejector on Sub-Spindle, Mist / Oil Collector, High Pressure Coolant, Live and Standard Tool Holders | Yes | 2000 Emco Maier Emco-Turn 332 Siemens 840D |
| Amera-Seiki | GT-32 | 1996 | 8436 | LATHES, CNC, GANG STYLE | Fanuc OTC | Good | Yes | 14.3" Swing, 10.8" OCS, 4" Turning Dia., 11.8" Turn Length, 1.57" Spindle Bore, 10 HP, 12" x 20.8" Gang Slide, 16C Collet Closure | Yes | 1996 Amera-Seiki GT-32 Fanuc OTC |
| Mazak | Quick Turn-6G | 1997 | 7297 | LATHES, CNC, GANG STYLE | | Good | Yes | | Yes | 1997 Mazak Quick Turn-6G |
| Wasino | G-6 | 1999 | 8694 | LATHES, CNC, GANG STYLE | Fanuc 21iT | Good | Yes | 15.75" Swing, 6,000 RPM, 5.5 HP, 8 Sta. Slide, Tailstock, 5C Collet Chuck, Intergrated Robot Load / Unload Gantry System, Tool Setter, Parts Stacker | Yes | 1999 Wasino G-6 Fanuc 21iT |
| Mori-Seiki | DL-151 MCY | 1999 | 7877 | LATHES, CNC, OPPOSING SPINDLES W-MILLING | Fanuc 18TA | Good | Yes | 16.5" Swing, 7.8" SOC, 5,000 RPM, 2.2" Bore, 15 HP, 2-12 Sta. Turret, Two (2) 6" 3-Jaw Chucks and Two (2) 3J Collet Chucks, Chip Conveyor, Bar Feed Interface, Parts Conveyor, Two (2) Tool Pre-Setters, Auto Parts Catcher With Ejector, Full C-Axis, Y-Axis, Live Tooling | Yes | 1999 Mori-Seiki DL-151 MCY Fanuc 18TA |
| Dong Yang | LS | | 10120 | LATHES, ENGINE | | Very Good | Yes | | Yes | Dong Yang LS |
| Kingston | HL-2500 | 1978 | 9047 | LATHES, ENGINE | | Good | Yes | | Yes | 1978 Kingston HL-2500 |
| Kingston | HLC-1860 | 1978 | 7996 | LATHES, ENGINE | | Very Good | Yes | | Yes | 1978 Kingston HLC-1860 |
| Leblond | Regal Servo-Shift | 1956 | 9522 | LATHES, ENGINE | | Very Good | Yes | Swing Over Bed 19", Swing Over Saddle 11 1/4", Maximum Turning Length 78", 1,800 RPM, 5 HP, Tailstock, 12" 4-Jaw Chuck, 10" 3-Jaw Chuck, 16" Face Plate, Flex Collet Head, Follow Rest, Inch / Metric Threading, Servo Shift Controls, Aloris Tool Post, Trav-a-Dial | Yes | 1956 Leblond Regal Servo-Shift |
| Meuser | M-IV-5 | 1968 | 8838 | LATHES, ENGINE | | Very Good | Yes | 36.5" Swing, 26.5" SOC, 360" Centers, 15 HP, Inch Metric Threading, Four (4) Way Tool Post, Three (3) Steady Rests | Yes | 1968 Meuser M-IV-5 |
| Hardinge | ASM-5C | 1977 | 8217 | LATHES, SECOND OPERATION | | Good | Yes | | Yes | 1977 Hardinge ASM-5C |
| Warner and Swasey | 3A M-1200 | 1958 | 10026 | LATHES, TURRET - RAM TYPE | | Good | Yes | | Yes | 1958 Warner and Swasey 3A M-1200 |
| Warner and Swasey | 3A M-1200 | 1957 | 8169 | LATHES, TURRET - RAM TYPE | | Good | Yes | 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, 8" 3-Jaw Chuck, Coolant Pan and Pump, Single Tool Post | Yes | 1957 Warner and Swasey 3A M-1200 |
| Warner and Swasey | 3A M-1200 Lot 288 | 1942/2000 | 7925 | LATHES, TURRET - RAM TYPE | | Good | Yes | 15 3/8" Swing, SOC 7", Spindle Nose to Turret Face 26", 1,480 RPM, 7.5 HP, 6 position Turret, Collet Chuck, Coolant Pan and Pump, Haase Quick Change Tool Post, Rebuilt Seven (7) Years Ago | Yes | 1942/2000 Warner and Swasey 3A M-1200 Lot 288 |
| Gisholt | 1L | | 8167 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Gisholt 1L |
| Gisholt | 1L | | 8168 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Gisholt 1L |
| Warner and Swasey | 4A M-3550 | | 8500 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | Yes | Warner and Swasey 4A M-3550 |
| Amera-Seiki | A-50H | 2010 | 7347 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMB | Like New | Yes | | Yes | 2010 Amera-Seiki A-50H Fanuc 18iMB |
| Cincinnati | Maxim-500 | 1995 | 9059 | MACHINING CENTERS, HORIZONTAL CNC | Acramatic 950 | Good | Yes | | On Way | 1995 Cincinnati Maxim-500 Acramatic 950 |
| Cincinnati | Maxim-500 | 1992 | 9102 | MACHINING CENTERS, HORIZONTAL CNC | Acramatic 950 | Very Good | No | Two (2) 19.7" x 19.7" Pallets, 360,000° Indexing, 29.5" x 29.5" x 29.5" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library, High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2) Extra Pallets | Yes | 1992 Cincinnati Maxim-500 Acramatic 950 |
| Daewoo | DHP-630 | 2001 | 9320 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16iMB | Very Good | Yes | | Yes | 2001 Daewoo DHP-630 Fanuc 16iMB |
| Haas | HS-1RP | 2000 | 7869 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Very Good | Yes | 16" x 16" Pallets, 24" x 20" x 22", 10,000 RPM, 40 Taper, 20 HP, 24 ATC, Chip Auger, RS-232 Port, Rigid Tapping, Coolant Through Spindle (300 PSI), Remote Jog Handle, 1 Meg Memory, Two (2) Kurt Vise Towers (8 positions each), Custom Macros, 3.5" Floppy Drive | Yes | 2000 Haas HS-1RP Haas 32 BIT |
| Haas | HS-1RP | 1999 | 9129 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Very Good | Yes | | Yes | 1999 Haas HS-1RP Haas 32 BIT |
| Haas | HS-1RP | 2001 | 8962 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Good | Yes | | Yes | 2001 Haas HS-1RP Haas 32 BIT |
| Haas | HS-2RP | 1999 | 10149 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | | Yes | | On Way | 1999 Haas HS-2RP Haas 32 BIT |
| Haas | HS-2RP | 2001 | 10078 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Good | Yes | | Yes | 2001 Haas HS-2RP Haas 32 BIT |
| Hitachi-Seiki | HC-400 | 1985 | 9702 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 11M | Needs Work | Yes | | Yes | 1985 Hitachi-Seiki HC-400 Fanuc 11M |
| Hitachi-Seiki | HG-800 | 1995 | 8520 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15MB | Fair | Yes | 31.5" X 31.5" Pallets, 44" x 37" x 33" Travels, 6,000 RPM, 50 Taper, 30 HP, 60 ATC, 1 Deg., Manual Pulse Generator, Chip Conveyor, Rigid Tapping, Flood Coolant System, Spindle Chiller, Coolant Through Spindle, 320M Memory, 200 Tool Offsets | Yes | 1995 Hitachi-Seiki HG-800 Fanuc 15MB |
| Hitachi-Seiki | HS-630 | 1998 | 7490 | MACHINING CENTERS, HORIZONTAL CNC | Seicos Sigma 16M | Very Good | Yes | Two 24.8" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5" x 31.5" x 33.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle | Yes | 1998 Hitachi-Seiki HS-630 Seicos Sigma 16M |
| Kia | KH-50G | 2005 | 8094 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMB | Very Good | Yes | 19.7" x 19.7" Pallets, Full 4th, 29.9" x 27.8" x 25.6" Travels, 8,000 RPM, 50 Taper, 18.5 HP, 60 ATC, Rigid Tapping, High Pressure Coolant Through Spindle, Chip Conveyor, Remote Jog Handle, Some Tool Holders, Machine Installed in 2007 | Yes | 2005 Kia KH-50G Fanuc 18iMB |
| Kitamura | HX-300 | 1999 | 9518 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Very Good | Yes | 12" x 12" Pallets, Full 4th, 20.1" x 20.1" x 15.7" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic | Yes | 1999 Kitamura HX-300 Fanuc 15M |
| Kiwa | KNH-400 | 2001 | 8326 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18iMA | Very Good | Yes | 15.75" x 15.75" Pallets, 23.62" x 23.62" x 19.68" Travels, 10,000 RPM, 40 Taper, 25 HP, 64 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Remote Manual Pulse Generator, Chip Conveyor, Rigid Tapping | Yes | 2001 Kiwa KNH-400 Fanuc 18iMA |
| Makino | MCB-1210 | 1999 | 9362 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16M Pro3 | Good | Yes | | Yes | 1999 Makino MCB-1210 Fanuc 16M Pro3 |
| Matsuura | MC-900H 63 | 1987 | 9976 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 11M | Very Good | Yes | | Yes | 1987 Matsuura MC-900H 63 Fanuc 11M |
| Matsuura | MC-900H 63 | 1988 | 9975 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 11M | Very Good | Yes | | Yes | 1988 Matsuura MC-900H 63 Fanuc 11M |
| Matsuura | MC-900H 63 | 1988 | 9974 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 11M | Very Good | Yes | | Yes | 1988 Matsuura MC-900H 63 Fanuc 11M |
| Mazak | FH-8800 | 2000 | 10110 | MACHINING CENTERS, HORIZONTAL CNC | Mazatrol Fusion 640M | Good | Yes | | On Way | 2000 Mazak FH-8800 Mazatrol Fusion 640M |
| Mazak | H-400 / 40N | 1986 | 9742 | MACHINING CENTERS, HORIZONTAL CNC | Mazatrol M-2 | Good | Yes | | On Way | 1986 Mazak H-400 / 40N Mazatrol M-2 |
| Mitsubishi | M-H80D | 1994 | 9980 | MACHINING CENTERS, HORIZONTAL CNC | Mitsubishi 300 | Good | Yes | | Yes | 1994 Mitsubishi M-H80D Mitsubishi 300 |
| Mitsui-Seiki | HR-7A | 1984 | 8982 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 6MB | Good | Yes | | Yes | 1984 Mitsui-Seiki HR-7A Fanuc 6MB |
| Mitsui-Seiki | HT-3A | 1992 | 9865 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Good | Yes | | Yes | 1992 Mitsui-Seiki HT-3A Fanuc 15M |
| Mori-Seiki | MH-50 | 1987 | 8956 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 18M | Needs Repair | Yes | | Yes | 1987 Mori-Seiki MH-50 Fanuc 18M |
| Mori-Seiki | SH-63 | 1996 | 10106 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16M | Good | Yes | 24.8" x 24.8" Pallets, 33.07" x 29.92" x 33.07" Travels, 15,000 RPM, 50 Taper, 40 HP, 120 ATC, Chip Conveyor, Shower Coolant | Yes | 1996 Mori-Seiki SH-63 Fanuc 16M |
| Niigata | SPN-50 | 1995 | 8959 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16M | Very Good | Yes | | Yes | 1995 Niigata SPN-50 Fanuc 16M |
| Okuma | MC-500H | 1994 | 9979 | MACHINING CENTERS, HORIZONTAL CNC | OSP-5020M | Good | Yes | | Yes | 1994 Okuma MC-500H OSP-5020M |
| Okuma and Howa | Millac 550H | 2001 | 8323 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16iM | Very Good | Yes | 19.68" x 19.68" Pallets, 31.5" x 31.5" x 27.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Full 4th, High Pressure Coolant Through Spindle (1,000 psi), Hydraulics Plumbed To Each Pallet For Work Holding Fixtures, Chip Conveyor, 5,500 Cutting Hours, Cutting Only Aluminum | Yes | 2001 Okuma and Howa Millac 550H Fanuc 16iM |
| Scharmann | Salon 2 | 1989 | 10006 | MACHINING CENTERS, HORIZONTAL CNC | | | Yes | | On Way | 1989 Scharmann Salon 2 |
| Toshiba | BMC-80E | 1984 | 9978 | MACHINING CENTERS, HORIZONTAL CNC | Tosnuc 600M | Good | Yes | | Yes | 1984 Toshiba BMC-80E Tosnuc 600M |
| Amera-Seiki | A-1 APC | 2006 | 7345 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi 64SM | Like New | Yes | | Yes | 2006 Amera-Seiki A-1 APC Mitsubishi 64SM |
| Amera-Seiki | A-5 | 2010 | 7990 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMC | New | Yes | | Yes | 2010 Amera-Seiki A-5 Fanuc OiMC |
| Amera-Seiki | VX5-3 | 2009 | 8629 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 31iMA | New | No | | Yes | 2009 Amera-Seiki VX5-3 Fanuc 31iMA |
| Bostomatic | 505 | 1996 | 8109 | MACHINING CENTERS, VERTICAL, CNC | Bostomatic BDC-3200X | Good | Yes | | Yes | 1996 Bostomatic 505 Bostomatic BDC-3200X |
| Bridgeport | VMC-1000 P3 | 2006 | 9402 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OiMD | Very Good | Yes | | Yes | 2006 Bridgeport VMC-1000 P3 Fanuc OiMD |
| Butler Elgamill | HE 28363 | 1990 | 8044 | MACHINING CENTERS, VERTICAL, CNC | Heidenhain 355 | Good | Yes | 315" x 32" Table, 244" x 65" x 38" Travels, A-Axis Travel 130,000°, B-Axis Travel 360,000°, 3,000 RPM, 50 Taper, 29.5 HP, 40 ATC, Chip Conveyor, Full CNC Controlled Swivel Head, Power Draw Bar | Yes | 1990 Butler Elgamill HE 28363 Heidenhain 355 |
| Cincinnati | 20V-120 | 1989/2007 | 9203 | MACHINING CENTERS, VERTICAL, CNC | Centroid M 400 | Very Good | Yes | 122" x 29.92" Table, 120" x 30" x 24" Travels, +/- 29° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 | Yes | 1989/2007 Cincinnati 20V-120 Centroid M 400 |
| Cincinnati | 20V-80 | 1985/06 | 9204 | MACHINING CENTERS, VERTICAL, CNC | Centroid M 400 | Very Good | Yes | 84.05" x 29.92" Table, 78.74" x 29.94" x 24" Travels, +/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007 | On Way | 1985/06 Cincinnati 20V-80 Centroid M 400 |
| Cincinnati | Arrow-500 | 1995 | 9446 | MACHINING CENTERS, VERTICAL, CNC | Acramatic Series F | Needs Minor Repair | No | 27.5" x 20.5" Table, 20" x 20" x 20" Travels, 6,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port, Manuals, Rigid Tapping, Needs New Power Supply | Yes | 1995 Cincinnati Arrow-500 Acramatic Series F |
| Cincinnati | Sabre-1500 | 1998 | 9918 | MACHINING CENTERS, VERTICAL, CNC | Acramatic 2100 | Good | Yes | | Yes | 1998 Cincinnati Sabre-1500 Acramatic 2100 |
| Cincinnati | Sabre-750 | 1993 | 9445 | MACHINING CENTERS, VERTICAL, CNC | Acramatic 850 SX | Needs Minor Repair | No | 34" x 20" Table, 8,000 RPM, 15 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, High Torque Carrier, Manuals, Needs New Keyboard | Yes | 1993 Cincinnati Sabre-750 Acramatic 850 SX |
| Doosan | DMV-4020 / 40 | 2004 | 8273 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 21iMB | Excellent | Yes | | Yes | 2004 Doosan DMV-4020 / 40 Fanuc 21iMB |
| Fadal | EMC | 2006 | 8886 | MACHINING CENTERS, VERTICAL, CNC | Fadal 32MP CNC | Very Good | Yes | 29.5" x 16" Table, 20" x 16" x 14" Travels, 7,500 RPM, 40 Taper, 10 HP, 16 ATC, Rigid Tapping, RS-232 Port | Yes | 2006 Fadal EMC Fadal 32MP CNC |
| Fadal | VMC-4020 | 1997 | 8669 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 30 ATC, 3.5" Disk Drive, RS-232 Port | Yes | 1997 Fadal VMC-4020 Fadal 88HS |
| Fadal | VMC-4020 | 1997 | 8668 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | 47" x 20" Table, 40" x 20" x 28" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC, RS-232 Port | Yes | 1997 Fadal VMC-4020 Fadal 88HS |
| Fadal | VMC-4020 | 1986 | 9748 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88HS | Good | Yes | | Yes | 1986 Fadal VMC-4020 Fadal 88HS |
| Fadal | VMC-6030 | 1991 | 7689 | MACHINING CENTERS, VERTICAL, CNC | Fadal 88 | Good | Yes | 62.5" x 30" Table, 10,000 RPM, 15 HP, 40 Taper, 21 ATC, RS-232 Port | Yes | 1991 Fadal VMC-6030 Fadal 88 |
| Fadal | VMC-8030 | 2004 | 8884 | MACHINING CENTERS, VERTICAL, CNC | Fadal 32MP CNC | Very Good | Yes | 82.5" x 30" Table, 80" x 30" x 30" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 24 Side Mount ATC, Rigid Tapping, RS-232 Port, Coolant System, 8 MB Expanded Memory, Tsudokoma RN-320R Rotary Table With Tailstock, Remote Jog Handle, New Spindle, 7,500 Power On Hours | Yes | 2004 Fadal VMC-8030 Fadal 32MP CNC |
| Giddings and Lewis | Model 10VS | 1989 | 10064 | MACHINING CENTERS, VERTICAL, CNC | G&L 8000B | Very Good | Yes | | Yes | 1989 Giddings and Lewis Model 10VS G&L 8000B |
| Haas | HS-1RP | 2001 | 8341 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2001 Haas HS-1RP Haas 32 BIT |
| Haas | Mini-Mill | 2001 | 9361 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | 2001 Haas Mini-Mill Haas 32 BIT |
| Haas | VF-11/50 | 2008 | 10068 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | New, Never Used | No | | Yes | 2008 Haas VF-11/50 Haas 32 BIT |
| Haas | VF-2 SS | 2005 | 8148 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | 36" x 14" Table, 30" x 16" x 20" Travels, 12,000 RPM, 40 Taper, 30 HP, 24 ATC, 4th Axis Interface, Programmable Coolant, User Definable Macros, Rigid Tapping, High Speed Machining, Remote Jog Handle, 16 Meg of Memory | Yes | 2005 Haas VF-2 SS Haas 32 BIT |
| Haas | VF-3 | 1998 | 9316 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 1998 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2000 | 8369 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 48" x 18" Table, 40" x 20" x 25" Travels, 7,500 RPM, 20 HP, 40 Taper, 20 ATC, 4th Axis Interface (no tables), Chip Auger, Programmable Coolant, Rigid Tapping, 1 MB Memory, 3.5" Floppy, RS-232 Port, High Intensity Lighting, Spindle Orientation | Yes | 2000 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2002 | 10073 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas VF-3 Haas 32 BIT |
| Haas | VF-3 | 2002 | 10072 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 2002 Haas VF-3 Haas 32 BIT |
| Haas | VF-5/50 | 2005 | 9955 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 52" x 23" Table, 50" x 26" x 25" Travels, 10,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping, TR-210 Tilt Rotary Table, 16 MB Program Memory, High Speed Machining With Look Ahead, Remote Pulse Generator, USB Port, 40 Gig Hard Drive, Ethernet Port, Coordinate Rotation & Scaling, Probe Ready Option, Use Definable Macros, Spindle Orientation, Cable Assembly For M-Code | Yes | 2005 Haas VF-5/50 Haas 32 BIT |
| Haas | VF-5/50 | 2005 | 9957 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 52" x 23" Table, 50" x 26" x 25" Travels, 10,000 RPM, 50 Taper, 30 HP, 30 ATC, Programmable Coolant, Rigid Tapping, TR-210 Tilt Rotary Table, 16 MB Program Memory, High Speed Machining With Look Ahead, Remote Pulse Generator, USB Port, 40 Gig Hard Drive, Ethernet Port, Coordinate Rotation & Scaling, Probe Ready Option, Use Definable Macros, Spindle Orientation, Cable Assembly For M-Code | YES | 2005 Haas VF-5/50 Haas 32 BIT |
| Haas | VF-8/40 | 1997 | 9989 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 1997 Haas VF-8/40 Haas 32 BIT |
| Haas | VF-O | 1995 | 10162 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | 1995 Haas VF-O Haas 32 BIT |
| Haas | VF-OE | 1998 | 9929 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | 36" x 14" Table, 30" x 16" x 20" Travels, 7,500 RPM, 40 Taper, 20 HP, 20 ATC, Chip Auger, Rigid Tapping, RS-232 Port, Brushless Servo, 4th Axis Ready, Haas HRT-160 Rotary Table, Quick Code, Programmable Coolant, 3.5" Floppy Drive, 22,802 On Time, 8,616 Cycle Start and 6,000 Cutting Hours, Only Cut Aluminum | Yes | 1998 Haas VF-OE Haas 32 BIT |
| Hurco | BMC-30 | 1994 | 9809 | MACHINING CENTERS, VERTICAL, CNC | Ultramax II/Dual CRT | Needs Repair | Yes | | Yes | 1994 Hurco BMC-30 Ultramax II/Dual CRT |
| Hurco | BMC-30 | 1994 | 10114 | MACHINING CENTERS, VERTICAL, CNC | Delta Dynapath 10 | Very Good | Yes | 47.2" x 25.2" Table, 30" x 18" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, RS-232 Port, 3D Eprom Software, Coolant System, Rigid Tapping | Yes | 1994 Hurco BMC-30 Delta Dynapath 10 |
| Hurco | BMC-4020 HT | 1998 | 9435 | MACHINING CENTERS, VERTICAL, CNC | Ultramax SSM | Very Good | Yes | 47" x 19.7" Table, 40" x 20" x 24" Travels, 8,000 RPM's, 40 Taper, 20 HP, 24 ATC, Rigid Tapping, RS-232 Port | Yes | 1998 Hurco BMC-4020 HT Ultramax SSM |
| Hurco | Spirit 40 SLV | 1993 | 10164 | MACHINING CENTERS, VERTICAL, CNC | Fidia PC Base | Good | Yes | 47.2" x 19.7" Table, 6,000 RPM, 15 HP, 24 ATC, Linear Guides, Full Enclosure | Yes | 1993 Hurco Spirit 40 SLV Fidia PC Base |
| Hurco | VMX-50 | 2001 | 9434 | MACHINING CENTERS, VERTICAL, CNC | Ultramax IV/Dual CRT | Very Good | Yes | 59" x 26" Table, 50" x 26" x 24" Travels, 12,000 RPM's, 50 Taper, 30 HP, 30 ATC, Conversational Programming, Dual Screen Control, Chip Conveyor | Yes | 2001 Hurco VMX-50 Ultramax IV/Dual CRT |
| Ikegai | TV-4 | 1991 | 9151 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Good | Yes | | Yes | 1991 Ikegai TV-4 Fanuc OM |
| Kitamura | Mycenter-2 | 1989 | 9807 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Good | Yes | | Yes | 1989 Kitamura Mycenter-2 Fanuc OM |
| Kitamura | Mycenter-2 | 1993 | 9403 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Very Good | Yes | | Yes | 1993 Kitamura Mycenter-2 Fanuc OM |
| Kitamura | Mycenter-3 APC | 1992 | 9808 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80M | Good | Yes | | Yes | 1992 Kitamura Mycenter-3 APC Yasnac I80M |
| Leblond-Makino | SNC-64 | 1993 | 9415 | MACHINING CENTERS, VERTICAL, CNC | Fanuc Pro 3 CNC | Good | Yes | | On Way | 1993 Leblond-Makino SNC-64 Fanuc Pro 3 CNC |
| Matsuura | MC-600-VF | 1994 | 9158 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Needs Repair | Yes | | Yes | 1994 Matsuura MC-600-VF Yasnac I80 |
| Matsuura | MC-760V | 1987 | 9384 | MACHINING CENTERS, VERTICAL, CNC | Yasnac MX-2 | Good | No | | Yes | 1987 Matsuura MC-760V Yasnac MX-2 |
| Mazak | MTV-655 / 80N | 1998 | 9988 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Good | Yes | | Yes | 1998 Mazak MTV-655 / 80N Mazatrol M-Plus |
| Mazak | MTV-655 / 80N | 1998 | 10065 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Very Good | Yes | | Yes | 1998 Mazak MTV-655 / 80N Mazatrol M-Plus |
| Mazak | VTC-16B | 1996 | 8797 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Very Good | Yes | 57.5" x 16.1" Table, 44" x 16" x 20" Travels, 8,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Auto Tool Length Measurement, Rigid Tapping | Yes | 1996 Mazak VTC-16B Mazatrol M-Plus |
| Mazak | VTC-16B | 1997 | 9835 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-32B | Good | Yes | | On Way | 1997 Mazak VTC-16B Mazatrol M-32B |
| Mazak | VTC-16B | 1999 | 9583 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol Fusion 640 M | Very Good | Yes | 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping | Yes | 1999 Mazak VTC-16B Mazatrol Fusion 640 M |
| Mazak | VTC-16B | 1996 | 9584 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-32B | Good | Yes | 57.5" x 16.1"Table, 44" x 16" x 20" Travels, 7,000 RPM, 40 Taper, 15 HP, 24 ATC, EIA / ISO Input Function, Conversational Programming, Graphic Display, Helical Interpolation, Auto Tool Length Measurement, Rigid Tapping | Yes | 1996 Mazak VTC-16B Mazatrol M-32B |
| Mazak | VTC-20C | 1998 | 8715 | MACHINING CENTERS, VERTICAL, CNC | Mazatrol M-Plus | Good | Yes | 79" x 20.08" Table, 65" x 20.08" x 20.08" Travels, 7,000 RPM, 40 Taper, 20 HP, 48 ATC, Conversational Programming, EIA / ISO Input Function, Graphic Display, Rigid Tapping, Chip Conveyor, Center Divider For Running As a Two (2) Station Machine, Fix Table Traveling Column | Yes | 1998 Mazak VTC-20C Mazatrol M-Plus |
| Mighty | Viper VMC-950 | 1999 | 8843 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi Magic 640 | Very Good | Yes | 50" x 18" Table, 40" x 20" x 24.8" Travels, 8,000 RPM, 40 Taper, 25 HP, 21 ATC, Color Graphic Control, Remote Jog Handle, Chip Auger, Chip Flood Wash System, Hard Drive, Mighty Chip Cart, 3,000 Hours On Machine. Control Completely Rebuilt By Mitsubishi March 2005 | Yes | 1999 Mighty Viper VMC-950 Mitsubishi Magic 640 |
| Milltronics | CSS-1000 CGI | 2000 | 9763 | MACHINING CENTERS, VERTICAL, CNC | Centurion 6 SLS | Very Good | Yes | 45" x 16" Table, 30" x 16" x 16" Travels, 8,000 RPM, 24 HP, 20 ATC, Reverse Engineering | Yes | 2000 Milltronics CSS-1000 CGI Centurion 6 SLS |
| Milltronics | Partner | 1996 | 9420 | MACHINING CENTERS, VERTICAL, CNC | Centurion 7 | Very Good | Yes | | Yes | 1996 Milltronics Partner Centurion 7 |
| Mitsui-Seiki | VR-3A | 1985 | 10112 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 6M | Good | Yes | 29.5" x 20.08" Table, 27.56" x 17.7" x 17.7" Travels, 6,000 RPM, 40 Taper, 10 HP, 20 ATC, Coolant System, Remote Jog Handle | Yes | 1985 Mitsui-Seiki VR-3A Fanuc 6M |
| Mori-Seiki | Duracenter 5100 | 2008 | 10088 | MACHINING CENTERS, VERTICAL, CNC | Mori-Seiki MSC-504M | Excellent | Yes | | Yes | 2008 Mori-Seiki Duracenter 5100 Mori-Seiki MSC-504M |
| Mori-Seiki | MV-40 | 1993 | 7995 | MACHINING CENTERS, VERTICAL, CNC | Yasnac I80 | Very Good | Yes | 35.3" x 18" Table, 22" x 16.15" x 18.12" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours | Yes | 1993 Mori-Seiki MV-40 Yasnac I80 |
| Mori-Seiki | MV-JR | 1985 | 8742 | MACHINING CENTERS, VERTICAL, CNC | Yasnac MX-2 | Good | Yes | | Yes | 1985 Mori-Seiki MV-JR Yasnac MX-2 |
| Mori-Seiki | MV-JR | 1989 | 9383 | MACHINING CENTERS, VERTICAL, CNC | Yasnac MX-3 | Good | No | | Yes | 1989 Mori-Seiki MV-JR Yasnac MX-3 |
| Okuma and Howa | Millac 4VA | 1986 | 9750 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 6M | Good | Yes | | On Way | 1986 Okuma and Howa Millac 4VA Fanuc 6M |
| Quantum | Q-1250 V | 1999 | 7954 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 18M | Very Good | Yes | | Yes | 1999 Quantum Q-1250 V Fanuc 18M |
| Rambaudi | Rammatic 1400 | 1990/05 | 6373 | MACHINING CENTERS, VERTICAL, CNC | Siemens 802D | Good | Yes | | Yes | 1990/05 Rambaudi Rammatic 1400 Siemens 802D |
| Sharnoa | HPM-40 | 1997 | 7761 | MACHINING CENTERS, VERTICAL, CNC | Tiger 6 | Very Good | Yes | | Yes | 1997 Sharnoa HPM-40 Tiger 6 |
| Sharnoa | SV-36 | 1990 | 7757 | MACHINING CENTERS, VERTICAL, CNC | Tiger 5 | Very Good | Yes | | Yes | 1990 Sharnoa SV-36 Tiger 5 |
| Supermax | Max-1 Rebel | 1998 | 8875 | MACHINING CENTERS, VERTICAL, CNC | Fanuc OM | Very Good | Yes | | Yes | 1998 Supermax Max-1 Rebel Fanuc OM |
| Haas | VF-3 APC | 1998 | 9828 | MACHINING CENTERS, VERTICAL, CNC W-PALLETS | Haas 32 BIT | Very Good | Yes | Two 48" x 18" Pallets, 40" x 20" x 25" Travels, 7,500 RPM, 40 Taper, 20 HP, 24 ATC, 4th Axis Interface, Rigid Tapping, 3.5" Floppy Drive, Quick Code Programming, 1 Meg of Memory, Programmable Coolant, Factory Installed Pallet Changer (30 sec. Pallet change time), Coordinate Rotation and Scaling, Quick Code, Remote Jog Handle, Coolant Through Spindle, Macros, HRT-310 Rotary With Tailstock | Yes | 1998 Haas VF-3 APC Haas 32 BIT |
| Haas | VF-3 APC | 1997 | 9651 | MACHINING CENTERS, VERTICAL, CNC W-PALLETS | Haas 32 BIT | Very Good | Yes | | Yes | 1997 Haas VF-3 APC Haas 32 BIT |
| Kitamura | Mycenter-1 APC | 1996 | 9623 | MACHINING CENTERS, VERTICAL, CNC W-PALLETS | Fanuc OM | Good | Yes | | Yes | 1996 Kitamura Mycenter-1 APC Fanuc OM |
| Rockford | 36" x 21" | 1953 | 8848 | MILLERS, PLANER TYPE (Including Millers, Slab) | | Very Good | Yes | | Yes | 1953 Rockford 36" x 21" |
| Bridgeport | Series I | 1982 | 5758 | MILLERS, UNIVERSAL | | Fair | Yes | | Yes | 1982 Bridgeport Series I |
| Birmingham | B3VS | 2002 | 8704 | MILLERS, VERT-UNIVERSAL NC and CNC | Centroid M 400 | Very Good | Yes | 60" x 12" Table, 41" x 20" x 23" Travels, 5,160 RPM, 5 HP, 40 Taper, Engraving Software, Hard Drive, 128 MB Ram, RS-232 & Ethernet Ports, Inverter Drive System, 3.5" Floppy, Remote Jog Hand Wheel for X, Y, Z & 4th, Power Draw Bar, Digitizing Probe & Software, TT-1 Probe for Tool Measuring, Unlimited File Size Software, BobCadCam Design Software, Laser Mapping of Ballscrews ISO 1725 Certification | Yes | 2002 Birmingham B3VS Centroid M 400 |
| Hurco | Hawk 40 Advantage Series | 1998 | 9042 | MILLERS, VERT-UNIVERSAL NC and CNC | Ultramax IV/Dual CRT | Good | Yes | 58" x 13" Table, 40" x 20" x 20" Travels, 4,000 RPM, 5 HP, Power Draw Bar, Hardened and Ground Box Ways, DFX Translator | Yes | 1998 Hurco Hawk 40 Advantage Series Ultramax IV/Dual CRT |
| Tree | Journeyman 325 | 1985 | 7853 | MILLERS, VERT-UNIVERSAL NC and CNC | Delta Dynapath 20M/CRT | Good | Yes | 44" x 10" Table, 27" x 14" x 6" x 15.75" Travels, 6,000 RPM, 5 HP, 40 Taper, 4th Axis Rotary Table | Yes | 1985 Tree Journeyman 325 Delta Dynapath 20M/CRT |
| Carr Lane | Zero-Point Mounting System | 2006 | 9419 | MISCELLANEOUS COMPONENTS | | Good | Yes | | On Way | 2006 Carr Lane Zero-Point Mounting System |
| LNS | Magnetic Chip Conveyor | 2009 | 10139 | MISCELLANEOUS COMPONENTS | | Like New | Yes | | Yes | 2009 LNS Magnetic Chip Conveyor |
| Stocker and Yale | 11 MDA-210 | 1962 | 5336 | MISCELLANEOUS COMPONENTS | | Excellent | Yes | Stocker & Yale 11 MDA-210 | Yes | 1962 Stocker and Yale 11 MDA-210 |
| De Dietrich | Mixer | 1988 | 8618 | MIXERS, LIQUID | | Good | Yes | | Yes | 1988 De Dietrich Mixer |
| Rousselle | 2F | 1989 | 9811 | PRESSES, O.B.I. | | Good | Yes | 15 Tons, 11" x 16" Bed, 5" x 5" Bed Opening, 8" Shut Height, 12" Throat, 2" Stroke, 160 SPM, 1.5" Ram Adjustment, Air Clutch and Brake, Dual Palm Safety Buttons, Safety Cage Around Opening | Yes | 1989 Rousselle 2F |
| Buffalo | 2 VBR | 1975 | 8829 | ROLLS, ANGLE BENDING | | Good | Yes | | Yes | 1975 Buffalo 2 VBR |
| Roundo | R-13-S | 1996 | 9170 | ROLLS, ANGLE BENDING | | Very Good | Yes | Angle Bend Capacity - 8" x 8" x 1 - 1/4", Diameter of Bending Rolls 32", 108 HP, Large Selection of Dies For Pipe and Beams, Large Selection of Spacers, Oversized Shaft, Motors & Drive, Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full Pendant Control, Five (5) Sets of Pipe Rolls | Yes | 1996 Roundo R-13-S |
| Cole-Tuve | 4RS-10-380 | 2009 | 8720 | ROLLS, PLATE BENDING, INITIAL PINCH | | New | No | | Yes | 2009 Cole-Tuve 4RS-10-380 |
| Cole-Tuve | PRH-10-380 | 2009 | 8664 | ROLLS, PLATE BENDING, INITIAL PINCH | | New | Yes | | | 2009 Cole-Tuve PRH-10-380 |
| Webb | 6L | 1956 | 8735 | ROLLS, PLATE BENDING, INITIAL PINCH | | Very Good | Yes | 6' Roll Length, 1/2" Mild Steel Cap. 9" Roll Dia., 10 HP, Three (3) Rolls Power Driven, Magnetic Brake Motor, Variable Rolling Speed, Rear Roll Adjust, Manual Pinch Roll Adjust, Drive System Work Done On Machine Recently, Machine Is Tight and Right | Yes | 1956 Webb 6L |
| Cole-Tuve | 3R-UHS-10-400 | 2010 | 9692 | ROLLS, PLATE BENDING, PYRAMID TYPE | | New | No | | Yes | 2010 Cole-Tuve 3R-UHS-10-400 |
| Cole-Tuve | 3R-UHS-10-450 | 2010 | 9734 | ROLLS, PLATE BENDING, PYRAMID TYPE | | New | No | | Yes | 2010 Cole-Tuve 3R-UHS-10-450 |
| Cole-Tuve | 3R-UHS-10-500 | 2010 | 9735 | ROLLS, PLATE BENDING, PYRAMID TYPE | | New | No | | Yes | 2010 Cole-Tuve 3R-UHS-10-500 |
| AXYZ Automation | Model 4010 | 2003 | 6729 | ROUTERS, NC and CNC | | Good | Yes | 168" x 16" Table, 150" x 16" x 18" Travels, 24,000 RPM, 30 Taper, 10 HP, Fog Buster Dual Wand Mister Lubricator, Desoutter AFDE430 Electric Drill with Pneumatic Ram, S-Mouse Rapid Material Surface / Tool Tip Sensor, Toolpath For Windows Interface Software C/W 2D & 3D Engraving Module, Remote Jog Handle | Yes | 2003 AXYZ Automation Model 4010 |
| Behringer | HBP-360 / 704 GA | 1998 | 9946 | SAWS, BAND, HORIZONTAL | | Good | Yes | | Yes | 1998 Behringer HBP-360 / 704 GA |
| Do-All | C-80 | 1975 | 9323 | SAWS, BAND, HORIZONTAL | | Good | Yes | 9" x 16" Capacity, 10 3/4" Round, 275 FPM, 2 HP, Work Light, Manual Vise, In-Feed Roller Table | Yes | 1975 Do-All C-80 |
| Peerless | HB-915A | 1988 | 9764 | SAWS, BAND, HORIZONTAL | | Good | Yes | | Yes | 1988 Peerless HB-915A |
| Sharp | 250A | 2005 | 8487 | SAWS, BAND, HORIZONTAL | | Very Good | Yes | | Yes | 2005 Sharp 250A |
| Allsteel | 20' x 3/4" | 1980 | 9146 | SHEARS, HYDRAULIC | | Very Good | Yes | 20" Bed, 3/4" Mild Steel Cap., 1/2" Stainless Cap., 60 HP, Three (3) 36" Front Sheet Supports, Fourteen (14) Independent Hydraulic Holddowns, Finger Guards, T-Slotted Bed | Yes | 1980 Allsteel 20' x 3/4" |
| Haas | HA-5C | | 8447 | TABLES, NC and CNC | | Good | Yes | | Yes | Haas HA-5C |
| Haas | HA-5C | 2006 | 9418 | TABLES, NC and CNC | | Very Good | Yes | | On Way | 2006 Haas HA-5C |
| Haas | HA-5C4 | 2001 | 9022 | TABLES, NC and CNC | | Good | Yes | | Yes | 2001 Haas HA-5C4 |
| Haas | HRT-160 | 2004 | 9805 | TABLES, NC and CNC | | Excellent | Yes | | Yes | 2004 Haas HRT-160 |
| Haas | TR-110 | 2001 | 9023 | TABLES, NC and CNC | | Very Good | Yes | | Yes | 2001 Haas TR-110 |
| Haas | TR-210H | 2005 | 9774 | TABLES, NC and CNC | | Very Good | No | | Yes | 2005 Haas TR-210H |
| Kitagawa | TR-320 | 2003 | 5081 | TABLES, NC and CNC | | Excellent | Yes | 12.60" Table, 3.93" Through Hole, 11.1 RPM | Yes | 2003 Kitagawa TR-320 |
| Ohio | 72" | 1968 | 7101 | TABLES, NC and CNC | | Very Good | Yes | Table Size (T-Slotted) - 72", 360,000°, Full Brake, Shot Pins at 90° | Yes | 1968 Ohio 72" |
| Troyke | U-18 | | 8677 | TABLES, ROTARY | | Very Good | | | Yes | Troyke U-18 |
| Precitech Precision | FMS 8150 | 2002 | 8328 | TESTERS, ROUNDNESS | | Very Good | Yes | | Yes | 2002 Precitech Precision FMS 8150 |
| Landis | Model A | 1952 | 10125 | THREAD ROLLERS | | Good | Yes | | Yes | 1952 Landis Model A |
| Landis | Model A | | 10126 | THREAD ROLLERS | | Good | No | | Yes | Landis Model A |
| Almco | OR-10 | 1987 | 9818 | VIBRATORS (Incl. Vibratory Finishers) | | Very Good | Yes | | Yes | 1987 Almco OR-10 |
| Sweco | FC-70 | 1977 | 7105 | VIBRATORS (Incl. Vibratory Finishers) | | Good | Yes | Bowl Capacity - 70 Cubic Feet, Barrel Diameter - 92", 20 HP, Internal Separation / Automatic Unloading, Polyurethane Lined Bowl, Additional 10" Collar Added to the Top | Yes | 1977 Sweco FC-70 |
| Matrix | Bowl Feeder | | 8196 | VIBRATORY FEEDERS | | Excellent | Yes | | Yes | Matrix Bowl Feeder |
| U.S. Tool Company | #33 Multi-Slide | | 8421 | WIRE MACHINERY, FORMING | | Very Good | Yes | Maximum Stock Width 2 1/2", Maximum Stock Thickness 3/32", Maximum Feed Length 12 1/2", 40 - 160 SPM, 5 HP, Twelve (12) Channel Touch Screen Control, Vari Drive (like new), Air Clutch and Brake, Two (2) Press Heads, One (1) Double Length Bolster, One (1) Box of Accessories, Rack & Pinion Stripper Head, Front Cut Off Unit, Vacuum System for Slugs, Positive Check Feed, Stock Mister | Yes | U.S. Tool Company #33 Multi-Slide |
